Marvell SwUpgrade P Tool V1.05 - No Need Activation
Marvell SwUpgrade P Tool is a small application (Tool) for Windows Computer, which allows you to flash or install the Stock Firmware (.blf ROM) on the devices powered by Marvell Chipset.
Marvell SWUpgrade is one of all the foremost necessary tools throughout flashing code. in the meantime principally used once you determined to Revet back from your custom ROM to code. Whereas, it wont to enable you to flash new stock ROM (Firmware) or throughout the flashing on your device, that is steam-powered by poet Chipset (SoC). Today, W goes to share a small amount of information with you concerning it to date.
Features:
Here is all the basic feature of Marvell SwUpgrade C Tool, Check it out here.
Portable Application
It was having a portable application, which means you don’t require to install the application on your computer so far. Meanwhile, you need to download and extract the file on your computer. It will open the Marvell_SwUpgrade_C.exe file on your computer.
Flash Firmware
Not to mention, With the help of this tool, you can easily flash or install the ROMs (Firmware) on your device. Therefore, you need to download the right firmware for your device; hence it requires you to use the Marvell SwUpgrade Tool so far. Likely, you need to install the Marvell Driver and then launch the Toll then click on the BLF button. Now, Select to Locate the .bif file on your firmware folder, and after that click on the play button to start flashing the ROMs (Firmware) on your device.
Support Marvell Device
As expected, your device should be powered by the Marvell Mobile platform, once you installed the Marvell Driver installed on your computer. In contrast, once the device has been device is connected then you can flash or install the ROMs (Firmware) on your device.
Support .bif format
This only supports the .bif based stock firmware, Where the device is to be powered by Marvell mobile platform so you can proceed to be flashed or flashed on your device.
How To Use?
- First thing first, download and install the Marvell USB Driver on your computer.
- Then, download the stock firmware (.bif) file on your Marvell based device.
- After that, Extract the Marvell SwUpgrade Tool on your computer and then extract the file using the tool.
- Now, Open the Marvell_SwUpgrade_C.exe and then launch the tool.
- Therefore, open the Marvell SwUpgrade and follow the on-screen instruction on your computer.
- Then, Click on the BLF button placed on the upper left corner of the screen.
- Now, Locate the .bif firmware on your computer and then click on the open button.
- Then, Connect your Marvell based Mobile and then click on the play button to start the flashing or installation process.
- Furthermore, Click yes when the warning dialogue box appears on your desktop and after that installation process will start itself.
- After this, It appears green to success message.
- That’s it, Quite the Marvell SwUpgrade C Tool and disconnect the device from the computer.
- Restart the device after it, Enjoy.
File Information:
Filename:- Marvell SwUpgrade P Tool
File Size:-6 MB
File Download:-Link
File Type:-exe
File Password:-No Need
README ONCE:
Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).
Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.
Credits: Marvell SwUpgrade P Tool is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.
Post a Comment