A125F Unknown Baseband Fix – Step-by-Step Guide by HalabTech

A125F Unknown Baseband Fix – Step-by-Step Guide by HalabTech

Today, we are giving you a complete solution to fix the Unknown Baseband issue on the Samsung Galaxy A125F device.

This problem occurs when reviving the device using a dump file without backing up the network (NVRAM/NVDATA) files, loss of baseband.


🔧 Step-by-Step Instructions:

1. Download Required Files

Start by downloading the attached files provided in the fix package.

2. Bypass AUTH Protection

  • Open the provided script to bypass the AUTH protection required by the flashing tool.

3. Hardware Preparation

  • Solder the CLK point (Clock) to GND (Ground) on the device.

  • Connect the phone to your PC via USB.

    4. Load Scatter File

    • Open SP Flash Tool.
    • Load the provided scatter file into the tool.

      5. Format Using Address Ranges

      • Go to the Format tab in SP Flash Tool.
      • Enter the first and second address values.
      • Disconnect the phone once done.

        6. Write the Second Set of Addresses

        • Reconnect the device.
        • Enter and write the second set of address values.

          By completing these steps, the baseband will be successfully restored on the A125F device.


          🛠 Final Touches:

          • Open Z3X Tool.
          • Write IMEI.
          • Perform a Patch Cert operation.

            Congratulations! Your A125F is now fully restored with network functionality.


            📥 Credits & Download Info:



            Post a Comment

            Previous Post Next Post