Realme C55 Scatter Firmware to Fix Dead Boot Issue

🛠 Realme C55 Scatter Firmware to Fix Dead Boot Issue – 100% Working

If your Realme C55 is stuck in dead boot condition — not turning on, no fast boot, no recovery — don’t worry. This issue can now be fixed using Scatter Firmware specially built for MTK-based Realme C55.

In this article, we’ll guide you through everything you need to know about the firmware, how it works, and how to revive your device safely.

🔧 What is Dead Boot?

A "dead boot" is a critical issue where the device becomes completely unresponsive:

• No power
• No charging symbol
• No boot logo
• No access to recovery or fastboot

This can happen due to:

• Corrupted system files
• Wrong firmware flashing
• Failed OTA update
• Interruptions during flashing process

✅ What is Realme C55 Scatter Firmware?

Scatter firmware is a special firmware structure used for MediaTek (MTK) devices, which includes:

• preloader.bin
• lk.bin
• boot.img
• system.img
• userdata.img
• Other essential partitions

This firmware is designed to be flashed via SP Flash Tool to completely rewrite the phone's memory and recover it from a dead boot state.

🔥 Features of the Realme C55 Scatter Firmware

• 🧠 Preloader Included (for dead boot fix)
• ⚡ Fast Flash Support via SP Flash Tool
• 🔄 Boot and Recovery Fixed
• 📱 Fully Compatible with Realme C55 (MTK Variant)
• ✅ Tested & Verified Firmware
• 🛡 Safe to Use, No Root Required

📥 Requirements

• PC with Windows OS
• SP Flash Tool (Latest Version)
• Realme C55 Scatter Firmware
• MTK USB Drivers
• USB Cable

📝 How to Flash Scatter Firmware on Realme C55

1. Download and Install MTK USB Drivers
   • Install properly to ensure device detection in SP Flash Tool.
2. Extract Firmware & SP Flash Tool
   • Make sure all files are extracted to an easy-to-access folder.
3. Open SP Flash Tool
   • Run as administrator.
4. Load Scatter File
   • Select the MT6769_Android_scatter.txt file inside the firmware folder.
5. Click “Download” in SP Flash Tool
   • Make sure all partitions are ticked (especially Preloader).
6. Now need an Android utility tool to bypass the auth
   • Open the program and click on the >Mediatek > BootRom > Disable Auth
7. Connect the Dead Realme C55
   • Hold Volume Down or Volume Up (or both) and connect via USB.
8. Wait for Flashing to Complete
   • You’ll see a green checkmark once done.
9. Reboot Your Device
   • Disconnect and press power. Your device should boot now!

Download Link

Realme C55 Scatter Firmware 

🧩 Common Fixes if Flashing Fails

• Reinstall MTK Drivers
• Use a different USB cable or port
• Make sure the preloader is enabled
• Run SP Flash Tool as Administrator
• Use a good battery charge (if it still charges)

⚠ Important Notes

• This is for Realme C55 (MTK Version Only).
• Flashing may erase data — backup if possible.
• Flash at your own risk; follow the steps carefully.
• Do not interrupt during flashing.