How to Repair IMEI on Redmi Note 12 Pro 4G (Sweet-k6a) Without Losing Data

How to Repair IMEI on Redmi Note 12 Pro 4G (Sweet_k6a) Without Losing Data – Locked Bootloader [HyperOS Guide]

If you’re looking to fix the IMEI on your Redmi Note 12 Pro 4G (Sweet_k6a) with HyperOS and a locked bootloader, without losing any data – you’re in the right place. In this guide, we’ll show you how to do it step by step using DFT Pro v5.08, safely and effectively.

✅ No data loss
✅ Works with locked bootloader
✅ HyperOS supported

 

⚙️ What You Need

• DFT Pro v5.08 software
• The first flash file (file_1)
• The second flash file (file_2)
• DIAG Mode enabled
• USB Cable
• PC or Laptop

🪛 Step-by-Step IMEI Repair Without Losing Data

Step 1: Enable DIAG Mode

To access DIAG mode, use the correct dial code for your device:

For Xiaomi (Qualcomm) phones like the Redmi Note 12 Pro 4G

Step 2: Open DFT Pro v5.08

• Launch DFT Pro v5.08 on your PC.
• Connect your phone with USB.
• Load the first flash file (as shown in the image).
• Use the “Multi Program” mode to flash.

Step 3: Flash First File

• Flash the first file using the correct loader settings in DFT Pro.
• Make sure "Backup EFS Safe" and "Set Boot Prev Drive" options are checked.
• Wait until flashing completes.

Step 4: Repair IMEI

• After flashing the first file, proceed with your IMEI repair process in DFT Pro.
• The DIAG mode should be active, and your phone will be recognized.

Step 5: Flash the Second File

• Once IMEI repair is successful, flash the second file to complete the process.
• This will restore the necessary partitions and finalize your repair.

✅ Done! You’ve Repaired IMEI Without Losing Data

That’s it! Your Redmi Note 12 Pro 4G is now back with its original IMEI, data intact, and bootloader still locked – fully compatible with HyperOS.

Download Link

https://www.jioaicloud.com/l/?u=cY4LBOSVpLBZb875nOGwme1CzN78xEWnYt2cTTqUl_FBrRy4Np-SXlNKQbWA9Np-MZA