FRP Remove Files for Samsung Devices (Odin Direct Flash) [A146B - A156E- A346E]

📲 FRP Remove Files for Samsung Devices [New Update]

If you recently reset your Samsung phone and now it is asking for the Google account login, you are facing FRP lock (Factory Reset Protection). This is a common problem after a factory reset when you don’t remember the Gmail ID or password linked to the device.

The good news is that FRP can be removed using special files in Odin mode. Below, we are sharing the latest tested FRP remove files for some Samsung models.

✅ Supported Devices and Download Links

Here are the new files that you can download directly:

• Samsung Galaxy A146B
  👉 Download FRP File
• Samsung Galaxy A156E
  👉 Download FRP File
• Samsung Galaxy A346E
  👉 Download FRP File

🛠️ Step-by-Step Guide to Remove FRP with Odin

If you are new to this process, don’t worry. Just follow these steps:

1. Download the correct file for your device from the links above.
2. Install Samsung USB drivers on your computer (important so Odin can detect your phone).
3. Put your Samsung device into Download Mode (Odin Mode):
   • Power off the phone.
   • Press and hold Volume Down + Volume Up together, then connect the USB cable.
   • Press Volume Up once to confirm.
4. Open the Odin tool on your PC.
5. In Odin, click on the AP/PDA button and select the FRP file you downloaded.
6. Make sure only Auto Reboot and F. Reset Time are checked.
7. Click Start. Odin will flash the file, and within a minute or two, your phone will reboot.

That’s it! Once your phone turns back on, the Google account lock should be removed.

⚠️ Important Notes Before You Start

• These FRP files are made for the models mentioned above. Don’t try them on other phones.
• Make sure your phone’s battery is at least 50% charged before flashing.
• If Odin does not detect your phone, reinstall the Samsung drivers and try again.
• This process may erase your data, so backup important files if possible.