MiPiTester English V2.01 Free Download | Flashing Free | EMMC

MiPi Tester Box Support UFS / eMMC Chip Programmer Intended for Reading / Writing / Repairing Data

MiPi Box Pro is a UFS / eMMC chip programmer intended for reading / writing / repairing data.

Features:

UFS / UMCP / ISP – Data transfer speed

• UFS/UMCP
  • UFS 2.0 / 2.1 / 3.0 / 3.1 supported
• HS-G2 high speed mode
  • 80-130 MB/s (writing) / 100-180 MB/s (reading)
  • for 100 MB higher speed you need to use USB 3.0 + high speed SSD
• UFS ISP
  Flying Line Mode PWM-G1 6-15MB/s (reading / writing)

EMMC/EMCP – Data transfer speed

• EMMC 4.5 / 5.0 / 5.1 supported
• HS200 80-120MB/s (write) / 120MB/s (read)
• EMMC ISP 5-15MB/s (read / write)

Upgrade NAND / PCIE / NVME / NOR / SPI / I2C Flash

• Supports UFS/UMCP dedicated descriptors, attributes, flags and other chip initialization and advanced settings
• LUN cutting
• Read / Write / Specify boot area
• Read / Write EMMC/EMCP User Area and BOOT1/2
• Read / Write advanced RPMB, GPP
• Enhanced Area settings
• Voltage output (VCC, VCCQ) 1.1 V – 3.3 V + intelligent short circuit protection

Supported BGA:

• UFS BGA 254
• UFS BGA 153
• eMMC BGA 153-169
• eMMC BGA 254
• eMMC BGA 221
• eMMC BGA 162-186

DOWNLOAD | MIRROR

README:

Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.

Credits: MiPiTester English V2.01 is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.