MiPi Tester Box Support UFS / eMMC Chip Programmer Intended for Reading / Writing / Repairing Data
MiPi Box Pro is a UFS / eMMC chip programmer intended for reading / writing / repairing data.
Features:
UFS / UMCP / ISP – Data transfer speed
- UFS/UMCP
- UFS 2.0 / 2.1 / 3.0 / 3.1 supported
- HS-G2 high speed mode
- 80-130 MB/s (writing) / 100-180 MB/s (reading)
- for 100 MB higher speed you need to use USB 3.0 + high speed SSD
- UFS ISP
Flying Line Mode PWM-G1 6-15MB/s (reading / writing)
EMMC/EMCP – Data transfer speed
- EMMC 4.5 / 5.0 / 5.1 supported
- HS200 80-120MB/s (write) / 120MB/s (read)
- EMMC ISP 5-15MB/s (read / write)
Upgrade NAND / PCIE / NVME / NOR / SPI / I2C Flash
- Supports UFS/UMCP dedicated descriptors, attributes, flags and other chip initialization and advanced settings
- LUN cutting
- Read / Write / Specify boot area
- Read / Write EMMC/EMCP User Area and BOOT1/2
- Read / Write advanced RPMB, GPP
- Enhanced Area settings
- Voltage output (VCC, VCCQ) 1.1 V – 3.3 V + intelligent short circuit protection
Supported BGA:
- UFS BGA 254
- UFS BGA 153
- eMMC BGA 153-169
- eMMC BGA 254
- eMMC BGA 221
- eMMC BGA 162-186
README:
Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).
Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.
Credits: MiPiTester English V2.01 is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.
إرسال تعليق