Redmi 9 (Lancelot) & Redmi Note 11R (Light) Network Repair Without Data Loss

Redmi 9 (Lancelot) & Redmi Note 11R (Light) Network Repair Without Data Loss

If you're facing network issues, IMEI errors, or NV data corruption on your Redmi 9 (Lancelot) or Redmi Note 11R (Light)—here's a tested and successful method to repair and restore your device without losing personal data.


🔧 Redmi 9 (Lancelot) – Repair Guide (No Data Loss)

Issue: IMEI corruption or network not working after flashing or unlocking.

Solution:

  1. Perform 2x NV Erase using CM2 MT2 Tool (Memory Tab)
    • Navigate to the Memory tab in CM2.
    • Perform NV Erase operation twice for complete cleanup.
  2. Write md1img.img File

    • Use CM2, SP Flash Tool, or other tools to write md1img.img to the MD1IMG partition.
    • This file helps rebuild the corrupted modem partition.
  3. Do Original Repair
    • After writing md1img, proceed with the original IMEI restore or NV rebuild using your preferred method or CM2.
    • Done ✅

🔧 Redmi Note 11R (Light) – "NV Data End Not Found / IMEI!" Fix

Firmware: MIUI 14.0.1.0 TLSTWXM (Taiwan)

Issue: IMEI not detected / "NV data end not found" error.

Solution Steps:

  1. Enter Meta Mode
  2. Use CM2, SP Flash Tool, or ADB commands to boot into Meta Mode for deep-level repair.
  3. Patch Cert
    • Patch device certificate using Meta mode tools (like CM2 or DFT Tool).
  4. Patch NV Data

    • Repair corrupted NV partition.
    • This ensures the IMEI and modem configuration is correctly restored.
  5. Unlock Using DFT Tool (Madem File Unlock)
    • Use DFT Unlock Tool for unlocking and repairing device-specific modem data.
  6. Write md1img.img
    • Flash the md1img.img to MD1IMG partition (fixes modem/NV issues).
  7. Repair Network

    1. After the above steps, the device should now detect SIM/network.
    2. Final check and repair using CM2 or Miracle Box.
✅ Result: Network Restored | IMEI Fixed | No Data Lost


    🧠 Notes:

    • Always back up your EFS/NVRAM before beginning.
    • Use the correct md1img.img file matching your firmware version.
    • Tools needed: CM2 MT2, DFT Unlock Tool, SP Flash Tool, or Miracle Box.
    • Drivers must be installed properly for Meta mode access.

    Download Link



    💬 Have questions or need md1img.img file? Drop a comment or contact us!
    📌 Follow for more advanced mobile repair guides.



    Post a Comment

    Previous Post Next Post