TECNO BG6 Spark GO 2024 Dead Fix Firmware

TECNO BG6 Spark GO 2024 Dead Fix | Auto Restart Fix Firmware (100% Tested) – ADT.RAR (2.5GB)

If you're facing dead issues or auto restart problems with your TECNO Spark Go 2024 (Model: BG6), we’ve got you covered. This guide provides a 100% tested firmware fix in the form of a .rar file (2.5GB) named ADT.RAR, specially crafted to solve common software issues, including boot loops, dead after flash, or random reboots.

🔧 Device Information:

• Model: TECNO Spark Go 2024 (BG6)
• Processor: Unisoc T606 (12nm)
• Android Version: Android 13 (Go Edition)
• Security Patch: Varies (as per region/firmware)
• File Name: TECNO_BG6_DEAD_FIX_ADT.rar
• File Size: 2.5GB
• Status: 100% Tested & Verified
• Tool Required: SPD Flash Tool or CM2/Dongle Box

🛠️ Common Issues Fixed:

• Device completely dead (no power, no charging response)
• Auto restart after logo
• Bootloop issue
• System UI crash
• Flash done but no boot
• Stuck on logo
• IMEI null (if not hardware-related)

📦 Contents of the RAR File:

• PAC File (Firmware for SPD/Unisoc Chipsets)
• Firmware Upgrade Tool (if needed)
• Driver Package for Windows
• ReadMe + Guide
• Optionally includes patched preloader or DA file

📥 Download Link:

🔗 Filename: TECNO_BG6_SPARK_GO_2024_DEAD_FIX_ADT.rar
💾 Size: 2.5 GB
(Make sure to extract with WinRAR or 7-Zip. Use a password if required.)

⚠️ Important: Make sure to fully charge the device, use a good USB cable, and backup data before flashing. Flashing may wipe your data.

 

🔌 How to Flash (Simple Guide):

1. Install SPD/Unisoc USB Drivers.
2. Extract the RAR file to your desktop.
3. Open SPD Upgrade Tool or your preferred box tool.
4. Load the .pac firmware file.
5. Power off the device and connect while holding the Volume Down or Up (depending on model).
6. Click Start, and flashing will begin.
7. Wait until "Passed" appears – Done!

⚠️ Disclaimer:

• This firmware is strictly for TECNO BG6 Spark Go 2024 only.
• Flashing wrong firmware can brick your device.
• We're not responsible for any damage. Follow instructions carefully.

✅ Tested By:

✅ GSMYOGESH Team
✅ ADT Team 2024
✅ 100+ Successful Fixes Reported
✅ Works with CM2, UMT, SPD Tool, or Miracle Thunder (Unisoc mode)

If your Spark Go 2024 is acting up – stuck, bootlooping, or showing no sign of life – this firmware is your go-to solution. Flash it, fix it, and bring your TECNO back to life. 🔥