How to Fix IMEI on Huawei Nova 10 SE (BNE-LX1)
If you are using a Huawei Nova 10 SE and suddenly your phone shows no network, there is a high chance the IMEI is missing. This usually happens after a wrong flash, failed update, or software mistake. Many people panic at this stage, but the truth is simple. In most cases, the phone hardware is fine. Only the software part related to IMEI is damaged.
This article explains how people fix this problem using the DT Pro tool. Everything is written in easy English so you can understand it without confusion.
What You Need
Before starting, keep these things ready.
You need a Huawei Nova 10 SE (Model BNE-LX1).
You need DT Pro or DFT Pro software.
You need a computer and a USB cable.
Make sure your phone battery is charged and your PC drivers are installed properly.
Step 1: Open the Phone and Take Backup
First, power off the phone completely. Now you need to open the device carefully. This is done to access the motherboard inside.
Once the phone is open, look for the test point. These are two small metal points on the board. They are used to put the phone into a special mode.
Short these two points and connect the phone to your computer using a USB cable. This puts the phone into EDL mode.
Now open the DFT Pro or DT Pro tool on your computer and take an EFS backup. You can think of this backup as a safety copy. If something goes wrong later, this backup can save your phone.
Never skip this step.
Step 2: Flash the Repair File
Now it is time to install the repair file.
First, download the required file from Google Drive using this link:
https://drive.google.com/file/d/1cInBDox2CL7vUyzJ9tz0_l3xHWoI7aau/view?usp=sharing
After downloading, open the DT Pro tool. Select the options exactly as shown inside the software, usually under the Huawei brand settings.
Keep the phone in EDL mode and flash the downloaded file using the EDL option. Do not remove the cable while flashing. Wait patiently until the process finishes.
This step fixes the damaged software part related to IMEI.
Step 3: Enter the Secret Code
After flashing is complete, disconnect the phone and power it on normally.
Once the phone starts, open the dialer where you type numbers to make calls. Now type this code exactly:
##2846579##
After entering the code, a hidden Huawei menu will open. This menu is normally used by service centers.
Step 4: Write the IMEI
Inside the menu, look for an option called Special Task and select it.
Now choose the option to replace IMEI.
Here is the most important point.
You must only write the second IMEI (IMEI 2).
Do not try to write the first IMEI.
Carefully type the original IMEI number that belongs to your phone. Double-check the number before saving.
Step 5: Done
After writing the IMEI, restart the phone.
There is no need to repair the network manually.
There is no need to write any QCN file.
If all steps were done correctly, your phone will catch network normally again.
Why This Method Works
This method fixes software damage, not hardware.
It restores the original IMEI safely.
It saves money and time.
It avoids unnecessary part replacement.
That is why many technicians use this process daily.
Common Questions
Will this damage my phone?
No, if you take EFS backup and follow steps carefully.
Do I need internet during repair?
Only to download the file. The repair itself works offline.
Can I use this on other Huawei models?
No. Steps may be different for other models.
What if network still does not come back?
Check the IMEI number again or restore the EFS backup.
Final Words
IMEI loss looks scary, but most of the time it is just a software mistake. With the right tool and patience, the phone can be fixed easily. Work slowly. Do not skip backup. That is how real technicians avoid problems.
Post a Comment